Loading
ROMAC CUSTOM PIPE REPAIR PRODUCTS
Romac manufactures many products which can be used for pipe repair that don't appear in the Romac catalog.

FS420 (and FS419 for plastic pipe): the FS420 is a FTS420 without the flanged outlet. These can also be made out of all stainless steel (SS420).

FS421: The high pressure version of the FS420. It has stiffening ribs on the body.

FS425: A split coupling (aka a split sleeve) and it can repair pipe that has full circumferential damage.

FS425S: Like the FS425 (a split coupling), but with the ability to go up and over an obstruction such as a bell, a coupling, a corp-stop or what ever else is in the way.

Service Saddles: Service saddles can be used as repair devices. If the saddle is tapped it can be plugged or a corp-stop can be installed which makes it very nice if the water can not be turned off. The ductile or bronze saddles can be sold with out a hole in the casting.

Stack Clamps: We can make repair clamps that allow you to put one clamp next to another, making a longer clamp. We offset the mat gasket two inches so that the clamps can be butt together without leaking. You can stack as many of these clamps together as needed.

Contact Romac’s Quotation department for price and availability and the Engineering department if you have further questions..

RELATED PRODUCTS

CLC

Description
Stainless steel collar leak clamp. Manufactured in the U.S.A.

Nominal Sizes
2 - 4 inches

Working Pressure
Up to 150 psi.

Application
Used to repair leaking solvent welds.

Pipe Compatibility
Recommended for use on plastic pipe.

Documents
Catalog Page
Product Submittal


ARMOR SEAL
Also functions as a coupling.

Description
Full circumferential, stainless steel repair clamp that can also be used as a coupling.

Nominal Sizes
4 - 24 inches

Working Pressure
See catalog page(s).

Application
Provides full circumferential repair of splits and holes.

Pipe Compatibility
Recommended for use on steel, cast iron, asbestos cement, concrete, PVC and HDPE pipe.

Documents
Brochure
Catalog Page
Installation Instructions
Product Submittal


CL1
Normal range .40"

Description
Full circumferential, single section cast lug repair clamp (available with tapped outlet). Manufactured in the U.S.A.

Nominal Sizes
2 - 12 inches.

Working Pressure
Up to 150 psi.

Application
Provides full circumferential repair of splits and holes.

Pipe Compatibility
Recommended for use on steel, cast iron, asbestos cement, plastic and other types of pipe.

Documents
Catalog Page
Catalog Page for Tapped Outlets
Installation Instructions
Product Submittal


PIPE PRODUCTS FOR WATER AND WASTE WATER
REPAIR CLAMPS | COUPLINGS | FLANGED COUPLINGS | EXPANSION JOINTS | SERVICE SADDLES | TAPPING SLEEVES
DISMANTLING JOINTS | SEWER PRODUCTS | RESTRAINT SYSTEMS | HDPE PIPE PRODUCTS | MISCELLANEOUS
TRANSMATE TAPPING EQUIPMENT | VALVE INSERTION

© 2017 ROMAC INDUSTRIES, INC. | 1.800.426.9341