FJ-RESTRAINT
Flexible Expansion Joint. Available with single and double ball joints. MANUFACTURED IN THE U.S.A.
3 - 24 inches. Larger sizes available upon request.
Up to 350 psi.
Flexible expansion joint which accommodates expansion, contraction, rotation, bending and settlement all at the same.
ECF400
Equipment Connection Fitting. MANUFACTURED IN THE U.S.A.
3 - 72 inches.
To the maximum rating of the flange - see product submittals for more information.
Used to provide offset, deflection and restraint for systems with misaligned flanges.
DJ405
Dismantling Joint. MANUFACTURED IN THE U.S.A.
3 - 24 inches.
To the maximum rating of the flange - see product submittals for more information.
Fully adjustable telescoping restraint without tie-rods. Ideal for systems that require periodic maintenance, the DJ405 can be adjusted to the desired length with up to five inches of travel within the unit. This tolerance allows access for installation or removal of valves and other fittings. For use on steel and ductile iron pipe.
DJ400
Dismantling Joint. MANUFACTURED IN THE U.S.A.
3 - 72 inches.
To the maximum rating of the flange - see product submittals for more information.
Fully adjustable traditional telescoping restraint with tie-rods. Ideal for systems that require periodic maintenance, the DJ400 can be adjusted to the desired length to allow access for installation or removal of valves and other fittings.
EJ401 & EJ403
Steel expansion joints (All stainless steel expansion joints also available). MANUFACTURED IN THE U.S.A.
3 - 150 inches.
For use in pipelines where larger than usual longitudinal movements are concentrated. For use on steel, cast iron, plastic and other types of pipe.
RFCA for PVC
Restrained flanged coupling adapter for PVC pipe. MANUFACTURED IN THE U.S.A.
3 - 24 inches.
Up to the pressure rating of the pipe.
Provides a restrained flexible flanged to plain-end connection. For use on PVC pipe.
RFCA
Restrained Flanged Coupling Adapter. MANUFACTURED IN THE U.S.A.
3 - 24 inches.
Up to 275 psi.
Used to provide a restrained flexible flanged to plain-end connection. For use on ductile iron pipe and IPS size STD steel pipe (sizes 3 - 12 inches).
FCG
Flanged Coupling Adapter. MANUFACTURED IN THE U.S.A.
3 - 12 inches.
Up to 275 psi.
Used to provide a flexible flanged to plain-end connection.
FC400
Fabricated steel flange coupling adapter. Meets AWWA C219. MANUFACTURED IN THE U.S.A
12 - 96 inches.
Up to 150 psi. For higher pressure ratings consult your representative.
Used to flexibly couple plain-end pipe to flange. For use on steel, cast iron, asbestos cement, plastic and other types of pipe.
FCA501
Ductile iron flanged coupling adapter. Introduced in 1970, the Romac 501 was the first color coded ductile iron coupling. Its interchangeable gaskets and end rings help to reduce inventory. Meets AWWA C219. MANUFACTURED IN THE U.S.A.
3 - 16 inches.
Up to 250 psi.
Used to provide a flexible flanged to plain-end connection. For use on steel, cast iron asbestos cement, plastic and other types of pipe.
702
Compression coupling. Manufactured in the U.S.A.
.5 - 2 inches.
Up to 150 psi.
Used to flexibly couple pipe of same diameters. For use on steel or plastic pipe.
511 Coupling
Lightweight ductile iron coupling for steel, copper and PVC pipe. Meets AWWA C219. MANUFACTURED IN THE U.S.A.
.5 - 12 inches nominal.
Up to 200 psi. For higher pressure ratings consult your representative.
Used to flexibly couple pipe of the same diameter. For use on steel, copper and PVC pipe.
IC400 Insulating Coupling
Fabricated steel insulating coupling. MANUFACTURED IN THE U.S.A.
12 - 96 inches.
Up to 300 psi.
Used to stop electrolytic action by isolating one pipe from the other. For use on steel, cast iron, asbestos cement, plastic and other types of pipe.
TC400 Transition Coupling
Fabricated steel transition coupling. Meets AWWA C219. MANUFACTURED IN THE U.S.A.
12 - 96 inches.
Up to 300 psi. See
product submittal for complete details.
Used to connect pipe of different known outside diameters within the same nominal size. For use on steel, cast iron, asbestos cement, plastic and other types of pipe.
RC400 Reducing Coupling
Fabricated steel reducing coupling. Meets AWWA C219. MANUFACTURED IN THE U.S.A.
12 - 96 inches.
Up to 500 psi. For higher pressures,
contact Romac Engineering.
Used to flexibly couple two pipes of different diameters. For use on steel, cast iron, asbestos cement, plastic and other types of pipe.
400 Steel Coupling
Fabricated steel coupling for pipe sizes 12" and larger. Meets AWWA C219. MANUFACTURED IN THE U.S.A.
12 - 96 inches. Larger sizes available upon request.
Up to 500 psi. For higher pressures,
contact Romac Engineering.
Used to flexibly couples pipe of same diameters. For use on steel, cast iron, asbestos cement, plastic and other types of pipe.
MACRO Two-Bolt Ductile Iron Coupling
Ductile iron, two-bolt extended range coupling. MANUFACTURED IN THE U.S.A. Patents Pending.
4 - 12 inches.
up to 260 psi.
Flexibly couples pipe of widely differing diameters. For use on steel, cast iron, asbestos cement, plastic and other types of pipe.
XR501 Coupling
Extended range ductile iron coupling. MANUFACTURED IN THE U.S.A.
4 - 12 inches.
Up to 260 psi. See
product submittal for complete details.
Used to flexibly couple pipe of widely different diameters (a range of IPS through Class 200 AC Pipe). For use on steel, cast iron, asbestos cement, plastic and other types of pipe.
EC501 End Cap Coupling
End cap coupling. Introduced in 1970, the Romac 501 was the first color coded ductile iron coupling. Its interchangeable gaskets and end rings help to reduce inventory. MANUFACTURED IN THE U.S.A.
4 - 16 inches.
Up to 260 psi. For higher pressure ratings consult your representative.
For testing or capping of a pipeline. For use on steel, cast iron, asbestos cement, plastic and other types of pipe.
IC501 Insulating Coupling
Ductile iron coupling with insulating boot. The IC501's insulating boot stops electrolytic action by isolating one pipe from the other. Introduced in 1970, the Romac 501 was the first color coded ductile iron coupling. Its interchangeable gaskets and end rings help to reduce inventory. Meets AWWA C219. MANUFACTURED IN THE U.S.A.
4 - 14 inches..
Up to 150 psi. For higher pressure ratings consult your representative.
Used to couple pipes of dissimilar metals. Flexibly couples pipe of same or different diameters. For use on steel, cast iron, other types of metallic pipe.
RC501 Reducing Coupling
Ductile iron reducing coupling. Introduced in 1970, the Romac 501 was the first color coded ductile iron coupling. Its interchangeable gaskets and end rings help to reduce inventory. Meets AWWA C219. MANUFACTURED IN THE U.S.A.
3 - 24 inches.
Up to 260 psi. For higher pressure ratings consult your representative.
Used to flexibly couples pipe of different diameters. For use on steel, cast iron, asbestos cement, plastic and other types of pipe.
501 Coupling
Straight, transition and long barrel couplings. Introduced in 1970, the Romac 501 was the first color coded ductile iron coupling. Its interchangeable gaskets and end rings help to reduce inventory. Meets AWWA C219. MANUFACTURED IN THE U.S.A.
2 - 24 inches.
Up to 260 psi. For higher pressure ratings consult your representative.
Flexibly couples pipe of same or different diameters. For use on steel, cast iron, asbestos cement, plastic and other types of pipe.
