Loading
HDPE PIPE END STIFFENERS

DESCRIPTION

Stainless steel pipe stiffeners. For use with Romac couplings and flanged couplings. Manufactured in the U.S.A.

Nominal Sizes
4 - 36 inches.

Application
Romac's specially designed stiffening inserts provide circumferential inside support of HDPE pipe ends. Constructed of stainless steel (per ASTM 240, type 304), the inserts reinforce the pipe without distrubing the flow characteristic of the medium.

Pipe Compatibility
For use on HDPE pipe. See catalog for details.

DOCUMENTS

Catalog Pages
HDPE Properties (Catalog Pages 8-1 thru 8-2)
Installation Instructions (Sizes 4 - 12 inch)
Installation Instructions (Sizes 14 - 36 inch)
Product Submittal (Sizes 4 - 12 inch)
Product Submittal (Sizes 14 - 36 inch)
RELATED PRODUCTS

101N-H & 202N-H
Ductile Iron Service Saddles for HDPE Pipe

Description
Nylon coated ductile iron service saddles with single or dual stainless steel straps. 101N-H and 202N-H service saddles use spring washers to compensate for pipe contraction during temperature and pressure changes. Manufactured in the U.S.A.

Nominal Sizes
2 - 12 inches.

Outlet Sizes
.5 - 2.5 inches.

Working Pressure
Pressure rating of the pipe up to 150 psi.

Pipe Compatibility
Recommended for use on HDPE pipe with a minimum wall thickness of SDR26.

Documents
Catalog Page
HDPE Properties (Catalog Pages 8-1 thru 8-2)
Installation Instructions
Product Submittal
101N-H Drawing (2 - 3 inch)
101N-H Drawing (4 - 12 inch)
202N-H Drawing (2 - 3 inch)
202N-H Drawing (4 - 12 inch)


305-H
Stainless Steel Service Saddle for HDPE Pipe

Description
All stainless steel service saddle for HDPE pipe. 305-H service saddles use spring washers to help compensate for pipe contraction during temperature and pressure changes. Manufactured in the U.S.A.

Nominal Sizes
10 - 12 inches and larger.

Outlet Sizes
.75 - 3 inches.

Working Pressure
Pressure rating of the pipe up to 150 psi.

Pipe Compatibility
Recommended for use on HDPE pipe with a minimum wall thickness of SDR26.

Documents
Catalog Page
HDPE Properties (Catalog Pages 8-1 thru 8-2)
Installation Instructions
Product Submittal


SS1-H, SS2-H & SS3-H
Stainless Steel Repair Clamps for HDPE Pipe

Description
Full circumferential stainless steel repair clamps for HDPE pipe (also available with tapped outlet). SS1-H, SS2-H and SS3-H repair clamps use spring washers to compensate for pipe contraction during temperature and pressure changes. MANUFACTURED IN THE U.S.A.

Nominal Sizes
2 - 12 inches.

Working Pressure
Pressure rating of the pipe up to 150 psi.

Application
Provides full circumferential repair of splits and holes.

Pipe Compatibility
Recommended for use on HDPE pipe with a minimum wall thickness of SDR26.

Documents
Catalog Page
HDPE Properties (Catalog Pages 8-1 thru 8-2)
Catalog Page for Tapped Outlets
Installation Instructions
Product Submittal


PIPE PRODUCTS FOR WATER AND WASTE WATER
REPAIR CLAMPS | COUPLINGS | FLANGED COUPLINGS | EXPANSION JOINTS | SERVICE SADDLES | TAPPING SLEEVES
DISMANTLING JOINTS | SEWER PRODUCTS | RESTRAINT SYSTEMS | HDPE PIPE PRODUCTS | MISCELLANEOUS
TRANSMATE TAPPING EQUIPMENT | VALVE INSERTION

© 2017 ROMAC INDUSTRIES, INC. | 1.800.426.9341