Loading
BP STAINLESS STEEL SEWER SADDLE FOR HDPE PIPE

DESCRIPTION

All stainless steel sewer saddle for HDPE pipe. The BP uses spring washers to help compensate for pipe contraction during temperature and pressure changes. Manufactured in the U.S.A.

Nominal Sizes
6 - 12 inches.

Outlet Sizes
4 and 6 inches.

Working Pressure
Up to 10 psi..

Pipe Compatibility
Recommended for use on HDPE pipe with a minimum wall thickness of SDR32.5.

DOCUMENTS

Catalog Page
HDPE Properties (Catalog Pages 8-1 thru 8-2)
Installation Instructions
Product Submittal
RELATED PRODUCTS

101N-H & 202N-H
Ductile Iron Service Saddles for HDPE Pipe

Description
Nylon coated ductile iron service saddles with single or dual stainless steel straps. 101N-H and 202N-H service saddles use spring washers to compensate for pipe contraction during temperature and pressure changes. Manufactured in the U.S.A.

Nominal Sizes
2 - 12 inches.

Outlet Sizes
.5 - 2.5 inches.

Working Pressure
Pressure rating of the pipe up to 150 psi.

Pipe Compatibility
Recommended for use on HDPE pipe with a minimum wall thickness of SDR26.

Documents
Catalog Page
HDPE Properties (Catalog Pages 8-1 thru 8-2)
Installation Instructions
Product Submittal
101N-H Drawing (2 - 3 inch)
101N-H Drawing (4 - 12 inch)
202N-H Drawing (2 - 3 inch)
202N-H Drawing (4 - 12 inch)


305-H
Stainless Steel Service Saddle for HDPE Pipe

Description
All stainless steel service saddle for HDPE pipe. 305-H service saddles use spring washers to help compensate for pipe contraction during temperature and pressure changes. Manufactured in the U.S.A.

Nominal Sizes
10 - 12 inches and larger.

Outlet Sizes
.75 - 3 inches.

Working Pressure
Pressure rating of the pipe up to 150 psi.

Pipe Compatibility
Recommended for use on HDPE pipe with a minimum wall thickness of SDR26.

Documents
Catalog Page
HDPE Properties (Catalog Pages 8-1 thru 8-2)
Installation Instructions
Product Submittal


SST-H
Stainless Steel Tapping Sleeve for HDPE Pipe

Description
Full circumferential seal, stainless steel tapping sleeve with side lifter bars. Available with ductile iron or stainless steel flange. SST-H tapping sleeves use spring washers to help compensate for pipe contraction during temperature and pressure changes. Manufactured in the U.S.A.

Nominal Sizes
4 - 12 inches.

Outlet Sizes
3 - 10 inches.

Working Pressure
Pressure rating of the pipe up to 150 psi.

Application
Used to make a branch outlet.

Pipe Compatibility
Recommended for use on HDPE pipe with a minimum wall thickness of SDR17

Documents
Catalog Page
HDPE Properties (Catalog Pages 8-1 thru 8-2)
Installation Instructions
Product Submittal


PIPE PRODUCTS FOR WATER AND WASTE WATER
REPAIR CLAMPS | COUPLINGS | FLANGED COUPLINGS | EXPANSION JOINTS | SERVICE SADDLES | TAPPING SLEEVES
DISMANTLING JOINTS | SEWER PRODUCTS | RESTRAINT SYSTEMS | HDPE PIPE PRODUCTS | MISCELLANEOUS
TRANSMATE TAPPING EQUIPMENT | VALVE INSERTION

© 2017 ROMAC INDUSTRIES, INC. | 1.800.426.9341