Loading
ROMAGRIP PIPE RESTRAINT
DESCRIPTION

Lug style pipe restraint. Sizes 3 - 24 manufactured in the U.S.A.

Nominal Sizes
3 - 48 inches.

Working Pressure
Up to 350 psi.

Application
Provides restraint of mechanical joints.

Pipe Compatibility
Recommended for use on ductile iron pipe and steel pipe sizes 3 - 12 inch.

DOCUMENTS

Catalog Page
Installation Instructions
RomaGrip Product Submittal (3 - 12 inch)
RomaGrip Product Submittal (14 - 24 inch)
RomaGrip Product Submittal (30 - 48 inch)
Drawing
RELATED PRODUCTS

PVC RomaGrip
PVC Pipe Restraint

Description
Lug style pipe restraint. Manufactured in the U.S.A.

Nominal Sizes
4 - 24 inches.

Working Pressure
Up to the pressure rating of the pipe with 2:1 test.

Application
Provides restraint of mechanical joints.

Pipe Compatibility
Recommended for use on PVC pipe. See catalog page for details.

Documents
Catalog Page
Installation Instructions (3 - 12 inch)
Installation Instructions (14 - 24 inch)
PVC RomaGrip Product Submittal (3 - 12 inch)
PVC RomaGrip Product Submittal (14 - 24 inch)
Drawing


GripRing
Pipe Restraint

Description
Full circumferential pipe restraint spreads the restraining forces more evenly than those using radial bolts or pads. The GripRing uses a standard mechanical joint gasket and t-bolts. There are no radial bolts for the installer to forget to tighten. When the t-bolts on the gland are tightened, the GripRing restraint is engaged. The GripRing may be used at the full rated capacity of the pipe, including an allowance for pressure surges. The 'gap' in each GripRing is designed to completely close before a pipe can be excessively stressed. MANUFACTURED IN THE U.S.A.

Nominal Sizes
4 - 12 inches.

Working Pressures
Up to 350 psi.

Application
Provides full circumferential restraint of mechanical joints.

Pipe Compatibility
Recommended for use on ductile iron, C900 and IPS PVC pipe (see catalog page for details).

Documents
Brochure
Catalog Pages
Installation Instructions
Product Submittal


600 Series
Restraint System

Description
Split pipe restraint.

Nominal Sizes
4 - 36 inch.

Application
Provides restraint for bell and spigot joints, transitions, couplings and mechanical joints.

Pipe Compatibility
For use on ductile iron, C900, C905 and IPS size PVC.
See catalog page for details.

Documents
Catalog Page
611 installation Instructions (4 - 12 inch)
611 installation Instructions (14 - 36 inch)
612 installation Instructions (4 - 12 inch)
612 installation Instructions (14 - 36 inch)
Product Submittal (4 - 12 inch)
Product Submittal (14 - 36 inch)
600 Drawing (4 - 12 inch)
611 Drawing (14 - 36 inch)
612 Drawing (14 - 36 inch)


PIPE PRODUCTS FOR WATER AND WASTE WATER
REPAIR CLAMPS | COUPLINGS | FLANGED COUPLINGS | EXPANSION JOINTS | SERVICE SADDLES | TAPPING SLEEVES
DISMANTLING JOINTS | SEWER PRODUCTS | RESTRAINT SYSTEMS | HDPE PIPE PRODUCTS | MISCELLANEOUS
TRANSMATE TAPPING EQUIPMENT | VALVE INSERTION

© 2017 ROMAC INDUSTRIES, INC. | 1.800.426.9341