Loading
FTS425 TAPPING SLEEVE
DESCRIPTION

Fabricated steel tapping sleeve with side and end gasket seals. Meets the requirements of MSS SP-124 and AWWA C223. Manufactured in the U.S.A.

Nominal Sizes
12 - 96 inches. Larger sizes available upon request.

Outlet Sizes
4 - 96 inch. Larger sizes (up to size on size) available upon request.

Working Pressure
See submittal.

Application
Used to make a branch outlet from a main supply line with extra protection for lines subjected to excessive beam loads.

Pipe Compatibility
Recommended for use on steel, cast iron, asbestos cement, plastic and other types of pipe.

.

DOCUMENTS

Catalog Page
Installation Instructions
Product Submittal
RELATED PRODUCTS

FTS420
Fabricated Steel Tapping Sleeve

Description
Fabricated steel tapping sleeve with drop-in bolts. Meets the requirements of MSP-SP124 and AWWA C223. Manufactured in the U.S.A.

Nominal Sizes
6 - 42 inches.

Outlet Sizes
3 - 42 inch.

Working Pressures
6 - 12 inch: Up to 250 psi.
14 - 36 inch: Up to 150 psi.
42 inch and larger: Up to 100 psi. For higher pressures, contact your representative.

Application
Used to make a branch outlet.

Pipe Compatibility
Recommended for use on steel, cast iron and other types of pipe.

Documents
Catalog Page
Installation Instructions
Product Submittal


STS420
Stainless Steel Tapping Sleeve

Description
Stainless steel tapping sleeve with triangular side bars. Also available with a threaded outlet (STS420T). Meets MSS SP-124 and AWWA C223. Manufactured in the U.S.A.

Nominal Sizes
6 - 42 inches.

Outlet Sizes
3 - 24 inch.

Working Pressure
6 - 12 inch: Up to 250 psi.
14 - 36 inch: Up to 150 psi.
42 inch and larger: Up to 150 psi. See submittal for details. For higher pressure ratings, consult your representative.

Application
Used to make a branch outlet.

Pipe Compatibility
Recommended for use on steel, cast iron, and other types of pipe.

Documents
Catalog Page
Installation Instructions
Product Submittal


FTS445
Tapping Sleeve

Description
Fabricated steel tapping sleeve for weld-on outlets. Manufactured in the U.S.A.

Nominal Sizes
6 - 96 inches.

Outlet Sizes
4 - 24 inch.

Working Pressure
Up to 175 psi. For higher pressure ratings, consult your representative.

Application
Used to make a branch outlet.

Pipe Compatibility
Recommended for use on steel pipe.

Documents
Catalog Page
Installation Instructions
Product Submittal
Drawing


PIPE PRODUCTS FOR WATER AND WASTE WATER
REPAIR CLAMPS | COUPLINGS | FLANGED COUPLINGS | EXPANSION JOINTS | SERVICE SADDLES | TAPPING SLEEVES
DISMANTLING JOINTS | SEWER PRODUCTS | RESTRAINT SYSTEMS | HDPE PIPE PRODUCTS | MISCELLANEOUS
TRANSMATE TAPPING EQUIPMENT | VALVE INSERTION

© 2017 ROMAC INDUSTRIES, INC. | 1.800.426.9341