ROMAC | Tapping Sleeves

2011 ROMAC INDUSTRIES, INC. | 800.426.9341

FTS425

Fabricated steel tapping sleeve with side and end gasket seals.Meets the requirements of MSS SP-124 and AWWA C223. Manufactured in the U.S.A.

12 - 96 inches. Larger sizes available on request.

4 - 96 inches. Larger sizes (up to size-on-size) available on request.

See product submittal

Used to make a branch outlet from a main supply line with extra protection for lines subject to excessive beam loads. For use on steel, cast iron, plastic, asbestos cement and other types of pipe.

Catalog Page
Installation Instructions
Product Submittal

FTS435

Fabricated steel tapping sleeve for concrete steel cylinder pipe. Manufactured in the U.S.A.

The FTS435 is available for all sizes of concrete cylinder pipe.

Determined by application.

See product submittal.

For use on concrete steel cylinder pipe.

Catalog Page
Installation Instructions
Product Submittal

FTS445

Fabricated steel tapping sleeve for weld-on outlets. Manufactured in the U.S.A.

6 - 96 inches.

4 - 24 inches.

Up to 175 psi. For higher pressure ratings consult your representative.

For use on steel pipe.

Catalog Page
Installation Instructions
Product Submittal
Product Drawing

FTS420

Fabricated steel tapping sleeve with triangular side bars. Meets the requirements of MSS SP-124 and AWWA C223. Manufactured in the U.S.A.

6 - 42 inches.

3 - 42 inches.

6 inch - 12 inch: 250 psi. 14 inch through 36 inch: 150 psi. 42 inch and larger: 100 psi. See product submittal for complete details. For higher pressure ratings consult your representative.

For use on steel, cast iron and other types of pipe.

Catalog Page
Installation Instructions
Product Submittal

FTS419

Fabricated steel tapping sleeve with drop-in bolts. Meets the requirements of MSP-SP124, and AWWA C223. Manufactured in the U.S.A.

4 - 24 inches.

3 - 12 inches.

Up to 175 psi.

For use on steel, ductile iron and plastic pipe.

Catalog Page
Installation Instructions
Product Submittal

FTS423-H

Fabricated steel tapping sleeve with drop-in bolts. Manufactured in the U.S.A.

4 - 12 inches.

3 - 10 inches.

Pressure rating of the pipe or 150 psi, whichever is less.

Used to make a branch outlet. For use on HDPE pipe.

Catalog Page
Installation Instructions
Product Submittal

SST-H

Full circumferential seal, stainless steel tapping sleeve with side lifter bars. Available with ductile iron flange or stainless steel flange. Manufactured in the U.S.A.

4 - 12 inches.

3 - 10 inches.

Pressure rating of the pipe or 150 psi, whichever is less.

Used to make a branch outlet. For use on HDPE pipe.

Catalog Page
Installation Instructions
Product Submittal

STS420

Stainless steel tapping sleeve with triangular side bars. Also available with a threaded outlet (STS420T). Meets MSS SP-124 and AWWA C223. Manufactured in the U.S.A.

6 - 42 inches.

3 - 24 inches.

6 inch - 12 inch: 250 psi. 14 inch through 36 inch: 150 psi. 42 inch and larger: 100 psi. See product submittal for complete details. For higher pressure ratings consult your representative.

Used to make a branch outlet. For use on steel, cast iron and other types of pipe.

Catalog Page
Installation Instructions
Product Submittal

SSTIII-MJ

Full circumferential seal, stainless steel tapping sleeve with triangular side bars and an MJ outlet. Meets MSS SP-124 and AWWA C223. Manufactured in the U.S.A.

4 - 30 inches.

up to 12 inches.

4 - 8 inches: 250 psi, 10 - 24 inches: 200 psi, 26 - 30 inches: 150 psi.

Used to make a branch outlet. For use on steel, cast iron, asbestos cement, plastic and other types of pipe.

Catalog Page
SSTIII-MJ Dimensions
Installation Instructions
Product Submittal

SSTIII

Full circumferential seal, stainless steel tapping sleeve with triangular side bars. Available with ductile iron flange, stainless steel flange or MJ outlet. Meets MSS SP-124 and AWWA C223. Manufactured in the U.S.A.

4 - 30 inches.

up to 12 inches.

4 - 8 inches: 250 psi, 10 - 24 inches: 200 psi, 26 - 30 inches: 150 psi.

Used to make a branch outlet. For use on steel, cast iron, asbestos cement, plastic and other types of pipe.

Catalog Page
SSTIII Dimensions
Installation Instructions
Product Submittal: (SSTIII w/ductile iron flange)
Product Submittal: (SSTIII w/stainless steel flange)

SSTMJ

Full circumferential seal, stainless steel tapping sleeve with MJ outlet. Meets MSS SP-124 and AWWA C223. Manufactured in the U.S.A.

4 - 24 inches.

up to 12 inches.

4 - 8 inches: 250 psi, 10 - 24 inches: 200 psi.

Used to make a branch outlet. For use on steel, cast iron, asbestos cement, plastic and other types of pipe.

Catalog Page
SSTMJ Dimensions
Installation Instructions
Product Submittal

SST

Full circumferential seal, stainless steel tapping sleeve with side lifter bars. Available with ductile iron flange, stainless steel flange or MJ outlet. Meets MSS SP-124 and AWWA C223. Manufactured in the U.S.A.

4 - 24 inches.

up to 12 inches.

4 - 8 inches: 250 psi, 10 - 24 inches: 200 psi.

Used to make a branch outlet. For use on steel, cast iron, asbestos cement, plastic and other types of pipe.

Catalog Page
SST Dimensions
Installation Instructions
Product Submittal (SST w/stainless steel flange)
Product Submittal (SST w/ductile iron flange)

Repair Clamps
Couplings
Dismantling Joints
Flanged Couplings
Service Saddles
Tapping Sleeves
Fab Steel Division
Sewer Products
Restraint Systems
FJ-Restraint
HDPE Products
Miscellaneous
Transmate
Valve Insertion
Non-Catalog Repair Products

Current Catalog
Product Submittals
Pipe OD Chart
LEED