Loading
STS420 STAINLESS STEEL TAPPING SLEEVE
DESCRIPTION

Stainless steel tapping sleeve with triangular side bars. Also available with a threaded outlet (STS420T). Meets MSS SP-124 and AWWA C223. Manufactured in the U.S.A.

Nominal Sizes
6 - 42 inches.

Outlet Sizes
3 - 24 inch.

Working Pressure
6 - 12 inch: up to 250 psi.
14 - 36 inch: up to 150 psi.
42 inch and larger: 150 psi. See submittal for details. For higher pressure ratings, consult your representative.

Application
Used to make a branch outlet.

Pipe Compatibility
Recommended for use on steel, cast iron, and other types of pipe.

DOCUMENTS

Catalog Page
Installation Instructions
Product Submittal
RELATED PRODUCTS

FTS420
Fabricated Steel Tapping Sleeve

Description
Fabricated steel tapping sleeve with drop-in bolts. Meets the requirements of MSP-SP124 and AWWA C223. Manufactured in the U.S.A.

Nominal Sizes
6 - 42 inches.

Outlet Sizes
3 - 42 inch.

Working Pressures
6 - 12 inch: Up to 250 psi.
14 - 36 inch: Up to 150 psi.
42 inch and larger: Up to 100 psi. For higher pressures, contact your representative.

Application
Used to make a branch outlet.

Pipe Compatibility
Recommended for use on steel, cast iron and other types of pipe.

Documents
Catalog Page
Installation Instructions
Product Submittal


SST
Stainless Steel Tapping Sleeves

Description
Full circumferential seal, all stainless steel tapping sleeve with side lifter bars. Available with ductile iron flange, stainless steel flange or MJ outlet. Meets MSS SP-124 and AWWA C223. Manufactured in the U.S.A.

Nominal Sizes
4 - 24 inches.

Outlet Sizes
Up to 12 inches.

Working Pressures
4 - 8 inch: 250 psi.
10 - 24 inch: 200 psi.

Application
Used to make a branch outlet.

Pipe Compatibility
Recommended for use on steel, cast iron, asbestos cement, plastic and other types of pipe.

Documents
Catalog Pages
Installation Instructions (SST)
Installation Instructions (SST-MJ)
Product Submittal (stainless steel flange)
Product Submittal (ductile iron flange)
Product Submittal (MJ outlet)
SST Dimensions
SST-MJ Dimensions


SSTIII
Stainless Steel Tapping Sleeves

Description
Full circumferential seal, all stainless steel tapping sleeve with triangular side bars. Available with ductile iron flange, stainless steel flange or MJ outlet. Meets MSS SP-124 and AWWA C223. Manufactured in the U.S.A.

Nominal Sizes
4 - 30 inches.

Outlet Sizes
Up to 12 inches.

Working Pressures
4 - 8 inch: 250 psi.
10 - 24 inch: 200 psi.
26 - 30 inch: 150 psi.

Application
Used to make a branch outlet.

Pipe Compatibility
Recommended for use on steel, cast iron, asbestos cement, plastic and other types of pipe.

Documents
Catalog Pages
Installation Instructions (SSTIII)
Installation Instructions (SSTIII-MJ)
Product Submittal (stainless steel flange)
Product Submittal (ductile iron flange)
Product Submittal (MJ outlet)
SSTIII Dimensions
SSTIII-MJ Dimensions


PIPE PRODUCTS FOR WATER AND WASTE WATER
REPAIR CLAMPS | COUPLINGS | FLANGED COUPLINGS | EXPANSION JOINTS | SERVICE SADDLES | TAPPING SLEEVES
DISMANTLING JOINTS | SEWER PRODUCTS | RESTRAINT SYSTEMS | HDPE PIPE PRODUCTS | MISCELLANEOUS
TRANSMATE TAPPING EQUIPMENT | VALVE INSERTION

© 2017 ROMAC INDUSTRIES, INC. | 1.800.426.9341