Loading
ALL HDPE PIPE PRODUCTS

ALPHA
Wide Range Restraint Coupling

Description
Wide range restrained joint. Installs in about three minutes. Accommodates Ductile iron through IPS PVC pipe diameters. Manufactured in the U.S.A.

Application
Used to couple and restrain plain end pipe with different diameters within the range.

Nominal Sizes
4 - 12 inches.

Working Pressure
Up to 350 psi.

Pipe Compatibility
Ductile Iron
Cast Iron (Class A, B, C & D)
PVC IPS size (Sch 40, Sch 80 and SDR 21)
PVC C900 & C909
HDPE (SDR 9, 11, 13.5 & 17). No pipe stiffeners are required.
For HDPE with an SDR greater than 17, pipe stiffeners are needed.

Documents:
Brochure
Catalog Page
4-6 inch Installation Instructions
8-12 inch Installation Instructions
Product Submittal
Sample Specification


ALPHA EC
Restrained End Cap

Description
Wide range, restrained end cap. Manufactured in the U.S.A.

Nominal Sizes
4 - 12 inches.

Working Pressure
Up to 350 psi.

Application
Alpha EC provides a fast, easy way to cap plain-end pipe. Designed for repeated use, the Alpha EC can also be used as a reliable pipe end seal for permanent installations.

Pipe Compatibility
Ductile Iron
Cast Iron (Class A, B, C & D)
PVC IPS size (Sch 40, Sch 80 and SDR 21)
PVC C900 & C909
HDPE (SDR 9, 11, 13.5 & 17). No pipe stiffeners are required.
For HDPE with an SDR greater than 17, pipe stiffeners are needed.

Documents:
Brochure
Catalog Page
4-6 inch Installation Instructions
8-12 inch Installation Instructions
Product Submittal
Sample Specification


ALPHA FC
Restrained Flanged Coupling

Description
Wide range, restrained flanged coupling adapter.

Nominal Sizes
4 - 12 inches.

Working Pressure
Up to 350 psi.

Application
Alpha FC provides a fast, easy way to connect and restrain plain-end pipe to flanged fittings.

Pipe Compatibility
Ductile Iron
Cast Iron (Class A, B, C & D)
PVC IPS size (Sch 40, Sch 80 and SDR 21)
PVC C900 & C909
HDPE (SDR 9, 11, 13.5 & 17). No pipe stiffeners are required.
For HDPE with an SDR greater than 17, pipe stiffeners are needed.

Documents:
Brochure
Catalog Page
4-6 inch Installation Instructions
8-12 inch Installation Instructions
Product Submittal
Drawing
Sample Specification


SS1-H, SS2-H & SS3-H
Stainless Steel Repair Clamps for HDPE Pipe

Description
Full circumferential stainless steel repair clamps for HDPE pipe (also available with tapped outlet). SS1-H, SS2-H and SS3-H repair clamps use spring washers to compensate for pipe contraction during temperature and pressure changes. MANUFACTURED IN THE U.S.A.

Nominal Sizes
2 - 12 inches.

Working Pressure
Pressure rating of the pipe up to 150 psi.

Application
Provides full circumferential repair of splits and holes.

Pipe Compatibility
Recommended for use on HDPE pipe with a minimum wall thickness of SDR26.

Documents
Catalog Page
Catalog Page for Tapped Outlets
HDPE Properties (Catalog Pages 8-1 thru 8-2)
Installation Instructions
Product Submittal


101N-H & 202N-H
Ductile Iron Service Saddles for HDPE Pipe

Description
Nylon coated ductile iron service saddles with single or dual stainless steel straps. 101N-H and 202N-H service saddles use spring washers to compensate for pipe contraction during temperature and pressure changes. Manufactured in the U.S.A.

Nominal Sizes
2 - 12 inches.

Outlet Sizes
.5 - 2.5 inches.

Working Pressure
Pressure rating of the pipe up to 150 psi.

Pipe Compatibility
Recommended for use on HDPE pipe with a minimum wall thickness of SDR26.

Documents
Catalog Page
HDPE Properties (Catalog Pages 8-1 thru 8-2)
Installation Instructions
Product Submittal
101N-H Drawing (2 - 3 inch)
101N-H Drawing (4 - 12 inch)
202N-H Drawing (2 - 3 inch)
202N-H Drawing (4 - 12 inch)


305-H
Stainless Steel Service Saddle for HDPE Pipe

Description
All stainless steel service saddle for HDPE pipe. 305-H service saddles use spring washers to help compensate for pipe contraction during temperature and pressure changes. Manufactured in the U.S.A.

Nominal Sizes
10 - 12 inches and larger.

Outlet Sizes
.75 - 3 inches.

Working Pressure
Pressure rating of the pipe up to 150 psi.

Pipe Compatibility
Recommended for use on HDPE pipe with a minimum wall thickness of SDR26.

Documents
Catalog Page
HDPE Properties (Catalog Pages 8-1 thru 8-2)
Installation Instructions
Product Submittal


306-H
Stainless Steel Service Saddle for HDPE Pipe

Description
All stainless steel service saddle for HDPE pipe. 306-H service saddles use spring washers to help compensate for pipe contraction during temperature and pressure changes. Manufactured in the U.S.A.

Nominal Sizes
2 - 8 inches.

Outlet Sizes
.5 - 2 inches.

Working Pressure
Pressure rating of the pipe up to 150 psi.

Pipe Compatibility
Recommended for use on HDPE pipe with a minimum wall thickness of SDR26.

Documents
Catalog Page
HDPE Properties (Catalog Pages 8-1 thru 8-2)
Installation Instructions
Product Submittal
Drawing


BP
Stainless Steel Sewer Saddle for HDPE Pipe

Description
All stainless steel sewer saddle for HDPE pipe. The BP uses spring washers to help compensate for pipe contraction during temperature and pressure changes. Manufactured in the U.S.A.

Nominal Sizes
6 - 12 inches.

Outlet Sizes
4 and 6 inches.

Working Pressure
Up to 10 psi..

Pipe Compatibility
Recommended for use on HDPE pipe with a minimum wall thickness of SDR32.5.

Documents
Catalog Page
HDPE Properties (Catalog Pages 8-1 thru 8-2)
Installation Instructions
Product Submittal


SST-H
Stainless Steel Tapping Sleeve for HDPE Pipe

Description
Full circumferential seal, stainless steel tapping sleeve with side lifter bars. Available with ductile iron or stainless steel flange. SST-H tapping sleeves use spring washers to help compensate for pipe contraction during temperature and pressure changes. Manufactured in the U.S.A.

Nominal Sizes
4 - 12 inches.

Outlet Sizes
3 - 10 inches.

Working Pressure
Pressure rating of the pipe up to 150 psi.

Application
Used to make a branch outlet.

Pipe Compatibility
Recommended for use on HDPE pipe with a minimum wall thickness of SDR17

Documents
Catalog Page
HDPE Properties (Catalog Pages 8-1 thru 8-2)
Installation Instructions
Product Submittal


FTS423-H
Fabricated Steel Tapping Sleeve for HDPE Pipe.

Description
Fabricated steel tapping sleeve for HDPE pipe. FTS423-H tapping sleeves uses special spring washers to help compensate for pipe contraction during temperature and pressure changes. Manufactured in the U.S.A.

Nominal Sizes
4 - 24 inches.

Outlet Sizes
3 - 10 inches.

Working Pressure
Pressure rating of the pipe up to 150 psi.

Application
Used to make a branch outlet.

Pipe Compatibility
Recommended for use on HDPE pipe with a minimum wall thickness of SDR17

Documents
Catalog Page
HDPE Properties (Catalog Pages 8-1 thru 8-2)
Installation Instructions
Product Submittal (4 - 12 inch sizes)
Product Submittal (14 - 24 inch sizes)


HDPE Pipe Stiffening Inserts
For Use with Romac Couplings

Description
Stainless steel pipe stiffeners. For use with Romac couplings and flanged couplings. Manufactured in the U.S.A.

Nominal Sizes
4 - 36 inches.

Application
Romac's specially designed stiffening inserts provide circumferential inside support of HDPE pipe ends. Constructed of stainless steel (per ASTM 240, type 304), the inserts reinforce the pipe without distrubing the flow characteristic of the medium.

Pipe Compatibility
For use on HDPE pipe. See catalog for details.

Documents
Catalog Pages
HDPE Properties (Catalog Pages 8-1 thru 8-2)
Installation Instructions (Sizes 4 - 12 inch)
Installation Instructions (Sizes 14 - 36 inch)
Product Submittal (Sizes 4 - 12 inch)
Product Submittal (Sizes 14 - 36 inch)


PIPE PRODUCTS FOR WATER AND WASTE WATER
REPAIR CLAMPS | COUPLINGS | FLANGED COUPLINGS | EXPANSION JOINTS | SERVICE SADDLES | TAPPING SLEEVES
DISMANTLING JOINTS | SEWER PRODUCTS | RESTRAINT SYSTEMS | HDPE PIPE PRODUCTS | MISCELLANEOUS
TRANSMATE TAPPING EQUIPMENT | VALVE INSERTION

© 2017 ROMAC INDUSTRIES, INC. | 1.800.426.9341