Loading
SST-H TAPPING SLEEVE FOR HDPE PIPE
DESCRIPTION

Full circumferential seal, stainless steel tapping sleeve with side lifter bars. Available with ductile iron or stainless steel flange. SST-H tapping sleeves use spring washers to help compensate for pipe contraction during temperature and pressure changes. Manufactured in the U.S.A.

Nominal Sizes
4 - 12 inches.

Outlet Sizes
3 - 10 inches.

Working Pressure
Pressure rating of the pipe up to 150 psi.

Application
Used to make a branch outlet.

Pipe Compatibility
Recommended for use on HDPE pipe with a minimum wall thickness of SDR17.

DOCUMENTS

Catalog Page
HDPE Properties (Catalog Pages 8-1 thru 8-2)
Installation Instructions
Product Submittal
RELATED PRODUCTS

101N-H & 202N-H
Ductile Iron Service Saddles for HDPE Pipe

Description
Nylon coated ductile iron service saddles with single or dual stainless steel straps. 101N-H and 202N-H service saddles use spring washers to compensate for pipe contraction during temperature and pressure changes. Manufactured in the U.S.A.

Nominal Sizes
2 - 12 inches.

Outlet Sizes
.5 - 2.5 inches.

Working Pressure
Pressure rating of the pipe up to 150 psi.

Pipe Compatibility
Recommended for use on HDPE pipe with a minimum wall thickness of SDR26.

Documents
Catalog Page
HDPE Properties (Catalog Pages 8-1 thru 8-2)
Installation Instructions
101N-H Drawing (2 - 3 inch)
101N-H Drawing (4 - 12 inch)
202N-H Drawing (2 - 3 inch)
202N-H Drawing (4 - 12 inch)


305-H
Stainless Steel Service Saddle for HDPE Pipe

Description
All stainless steel service saddle for HDPE pipe. 305-H service saddles use spring washers to help compensate for pipe contraction during temperature and pressure changes. Manufactured in the U.S.A.

Nominal Sizes
10 - 12 inches and larger.

Outlet Sizes
.75 - 3 inches.

Working Pressure
Pressure rating of the pipe up to 150 psi.

Pipe Compatibility
Recommended for use on HDPE pipe with a minimum wall thickness of SDR26.

Documents
Catalog Page
HDPE Properties (Catalog Pages 8-1 thru 8-2)
Installation Instructions
Product Submittal


SS1-H, SS2-H & SS3-H
Stainless Steel Repair Clamps for HDPE Pipe

Description
Full circumferential stainless steel repair clamps for HDPE pipe (also available with tapped outlet). SS1-H, SS2-H and SS3-H repair clamps use spring washers to compensate for pipe contraction during temperature and pressure changes. MANUFACTURED IN THE U.S.A.

Nominal Sizes
2 - 12 inches.

Working Pressure
Pressure rating of the pipe up to 150 psi.

Application
Provides full circumferential repair of splits and holes.

Pipe Compatibility
Recommended for use on HDPE pipe with a minimum wall thickness of SDR26.

Documents
Catalog Page
HDPE Properties (Catalog Pages 8-1 thru 8-2)
Catalog Page for Tapped Outlets
Installation Instructions
Product Submittal


PIPE PRODUCTS FOR WATER AND WASTE WATER
REPAIR CLAMPS | COUPLINGS | FLANGED COUPLINGS | EXPANSION JOINTS | SERVICE SADDLES | TAPPING SLEEVES
DISMANTLING JOINTS | SEWER PRODUCTS | RESTRAINT SYSTEMS | HDPE PIPE PRODUCTS | MISCELLANEOUS
TRANSMATE TAPPING EQUIPMENT | VALVE INSERTION

© 2017 ROMAC INDUSTRIES, INC. | 1.800.426.9341