Loading
ALL RESTRAINT

GripRing
Pipe Restraint

Description
Full circumferential pipe restraint spreads the restraining forces more evenly than those using radial bolts or pads. The GripRing uses a standard mechanical joint gasket and t-bolts. There are no radial bolts for the installer to forget to tighten. When the t-bolts on the gland are tightened, the GripRing restraint is engaged. The GripRing may be used at the full rated capacity of the pipe, including an allowance for pressure surges. The 'gap' in each GripRing is designed to completely close before a pipe can be excessively stressed. MANUFACTURED IN THE U.S.A.

Nominal Sizes
4 - 12 inches.

Working Pressures
Up to 350 psi.

Application
Provides full circumferential restraint of mechanical joints.

Pipe Compatibility
Recommended for use on ductile iron, C900 and IPS PVC pipe (see catalog page for details).

Documents
Brochure
Catalog Pages
Installation Instructions
Product Submittal


RomaGrip
Pipe Restraint

Description
Lug style pipe restraint. Sizes 3 - 24 manufactured in the U.S.A.

Nominal Sizes
3 - 48 inches.

Working Pressure
Up to 350 psi.

Application
Provides restraint of mechanical joints.

Pipe Compatibility
Recommended for use on ductile iron pipe and steel pipe sizes 3 - 12 inch.

Documents
Catalog Page
Installation Instructions
RomaGrip Product Submittal (3 - 12 inch)
RomaGrip Product Submittal (14 - 24 inch)
RomaGrip Product Submittal (30 - 48 inch)
Drawing


PVC RomaGrip
PVC Pipe Restraint

Description
Lug style pipe restraint. Manufactured in the U.S.A.

Nominal Sizes
3 - 24 inches.

Working Pressure
Up to the pressure rating of the pipe with 2:1 test.

Application
Provides restraint of mechanical joints.

Pipe Compatibility
Recommended for use on PVC pipe. See catalog page for details.

Documents
Catalog Page
Installation Instructions (3 - 12 inch)
Installation Instructions (14 - 24 inch)
PVC RomaGrip Product Submittal (3 - 12 inch)
PVC RomaGrip Product Submittal (14 - 24 inch)
Drawing


600 Series
Restraint System

Description
Split pipe restraint.

Nominal Sizes
4 - 36 inch.

Application
Provides restraint for bell and spigot joints, transitions, couplings and mechanical joints.

Pipe Compatibility
For use on ductile iron, C900, C905 and IPS size PVC.
See catalog page for details.

Documents
Catalog Page
611 installation Instructions (4 - 12 inch)
611 installation Instructions (14 - 36 inch)
612 installation Instructions (4 - 12 inch)
612 installation Instructions (14 - 36 inch)
Product Submittal (4 - 12 inch)
Product Submittal (14 - 36 inch)
600 Drawing (4 - 12 inch)
611 Drawing (14 - 36 inch)
612 Drawing (14 - 36 inch)


RFCA
Restrained Flange Coupling Adapter

Description
Flanged coupling adatper with restraint. Manufactured in the U.S.A.

Nominal Sizes
3 - 24 inches.

Working Pressure
Up to 275 psi.

Application
Used to provide a restrained flexible flanged to plain end connection.

Pipe Compatibility
Recommended for use on ductile iron, cast iron and 3-12 inch IPS Std. steel pipe.

Documents
Catalog Page
Installation Instructions
Product Submittal (3-12 inch sizes)
Product Submittal (14-24 inch sizes)
Drawing (3-12 inch sizes)
Drawing (14 - 24 inch sizes)


RFCA - PVC
Restrained Flanged Coupling Adapter for PVC

Description
Flanged coupling adatper with restraint. Manufactured in the U.S.A.

Nominal Sizes
3 - 24 inches.

Working Pressure
Up to the pressure rating of the pipe.

Application
Used to provide a restrained flexible flanged to plain end connection.

Pipe Compatibility
Recommended for use on PVC pipe (see catalog for complete details).

Documents
Catalog Page
Installation Instructions (3-12 inch sizes)
Installation Instructions (14-24 inch sizes)
Product Submittal (3-12 inch sizes)
Product Submittal (14-24 inch sizes)
Drawing (3 - 12 inch sizes)
Drawing (14 - 24 inch sizes)


ALPHA
Wide Range Restraint Coupling

Description
Wide range restrained joint. Installs in about three minutes. Accommodates Ductile iron through IPS PVC pipe diameters. Manufactured in the U.S.A.

Application
Used to couple and restrain plain end pipe with different diameters within the range.

Nominal Sizes
4 - 12 inches.

Working Pressure
Up to 350 psi.

Pipe Compatibility
Ductile Iron
Cast Iron (Class A, B, C & D)
PVC IPS size (Sch 40, Sch 80 and SDR 21)
PVC C900 & C909
HDPE (SDR 9, 11, 13.5 & 17). No pipe stiffeners are required.
For HDPE with an SDR greater than 17, pipe stiffeners are needed.

Documents:
Brochure
Catalog Page
4-6 inch Installation Instructions
8-12 inch Installation Instructions
Product Submittal
Sample Specification

VIDEO:
Alpha Overview


400RG
Restraint Coupling

Description
Restrained steel coupling. Manufactured in the U.S.A.

Nominal Sizes
12 - 48 inches.

Working Pressure
Up to 350 psi.

Application
Used to couple and restrain plain end pipe. Also available with a flanged end.

Pipe Compatibility
Recommended for use on ductile iron pipe.

Documents
Catalog Page
Installation Instructions
400RG Product Submittal
400RG for PVC Pipe Product Submittal
FC400RG (12 - 24 inch) Product Submittal
FC400RG (30 - 48 inch) Product Submittal
Drawing


ALPHA FC
Restrained Flanged Coupling

Description
Wide range, restrained flanged coupling adapter.

Nominal Sizes
4 - 12 inches.

Working Pressure
Up to 350 psi.

Application
Alpha FC provides a fast, easy way to connect and restrain plain-end pipe to flanged fittings.

Pipe Compatibility
Ductile Iron
Cast Iron (Class A, B, C & D)
PVC IPS size (Sch 40, Sch 80 and SDR 21)
PVC C900 & C909
HDPE (SDR 9, 11, 13.5 & 17). No pipe stiffeners are required.
For HDPE with an SDR greater than 17, pipe stiffeners are needed.

Documents:
Brochure
Catalog Page
4-6 inch Installation Instructions
8-12 inch Installation Instructions
Product Submittal
Drawing
Sample Specification


Piranha
Restraint Gasket

Description
Restraint gasket. Manufactured in the U.S.A.

Nominal Sizes
4 - 24 inches.

Working Pressure
Up to 350 psi (not to exceed pipe rating).

Application
For use only on ductile iron bell and spigot joints. Not for use on PVC pipe. See submittal for pipe compatibility.

Documents
Catalog Page
Brochure
Installation Instructions
Product Submittal (4-12 inch sizes)
Product Submittal (14-24 inch sizes)


FJ Restraint
Flexible Expansion Joint

Description
Flexible expansion joints. Single ball and double ball configurations available with flanged, MJ and plain ends. Manufactured in the U.S.A.

Nominal Sizes
3 - 24 inches. Larger sizes available upon request.

Working Pressure
Up to 350 psi.

Application
Flexible expansion joint accommodates expansion, contraction, rotation, bending and settlement all at the same time.

Documents
Catalog Pages
 Brochure
 Installation Instructions
Submittal, Flanged Ends, 3-24 inch
Submittal, Flanged Ends, 30-54 inch
Submittal, MJ Ends, 3-24 inch
Sample Specification

Drawings:
FJ Double-Ball, 3-24 inch
FJ Single-Ball, 3-12 inch
FJ SIngle-Ball, 14-24 inch
FJ Double-Ball, 30, 36 and 42 inch (flanged)
FJ Double-Ball, 48 inch (flanged)
FJ Double-Ball, 54 inch (flanged)


Armor Lock
Stainless Steel Restraint Coupling

Description
Stainless steel stab-fit restraint coupling.

Nominal Sizes
3 - 16 inches.

Working Pressure
See catalog for details.

Application
Used to couple and restrain plain end pipe.

Pipe Compatibility
Recommended for use on ductile iron, steel, PVC and HDPE pipe.

Documents
Brochure
Catalog Page
Installation Instructions
Product Submittal


DJ400
Dismantling Joint

Description
Dismantling joint. Manufactured in the U.S.A.

Nominal Sizes
3 - 72 inches.

Working Pressure
Up to the maximum rating of the flange. See submittal(s) for details.

Application
Adjustable telescoping restraint with tie-rods. Ideal for systems that require periodic maintenance, the DJ400 can be adjusted to length to allow access for installation or removal of valves and other equipment.

Documents
Brochure
Catalog Page
Installation Instructions (3-12 inch sizes)
Installation Instructions (14-72 inch sizes)
Product Submittal (3-12 inch sizes with Class D flange)
Product Submittal (14-72 inch sizes with Class D flange)
Product Submittal (3-12 inch sizes with Class E flange)
Product Submittal (14-72 inch sizes with Class E flange)
Product Submittal (3-12 inch sizes with Class F flange)
Product Submittal (14-48 inch sizes with Class F flange)
Drawing (3-12 inch sizes with Class D flange)
Drawing (14 - 72 inch sizes with Class D flange
Drawing (3-12 inch sizes with Class E flange)
Drawing (14 - 72 inch sizes with Class E flange)
Drawing (3 - 48 inch sizes with Class F flange)
Drawing (3-24 inch sizes with ANSI B16.5 Cls 300 flange)
Drawing (100-1000 mm sizes ISO 7005 PN 25 flange)
Drawing (100-1800 mm sizes ISO 7005 PN 10 flange)
Drawing (100-1800 mm sizes ISO 7005 PN 16 flange)


DJ405
Dismantling Joint with out tie-rods.

Description
Dismantling Joint. Manufactured in the U.S.A.

Nominal Sizes
3 - 24 inches.

Working Pressure
Up to the maximum rating of the flange. See submittal(s) for details.

Application
Adjustable telescoping restraint without tie-rods. Ideal for systems that require periodic maintenance, the DJ405 can be adjusted to length to allow access for installation or removal of valves and other equipment.

Documents
Brochure
Catalog Page
Installation Instructions
Product Submittal (3-12 inch sizes)
Product Submittal (14-24 inch sizes)
Drawing (3-24 inch sizes with Class D flange)
Drawing (3-24 inch sizes with Class E flange)
Drawing (3-24 inch sizes with Class F flange)


ECF400
Equipment Connection Fitting

Description
Equipment connection fitting. Manufactured in the U.S.A.

Nominal Sizes
3 - 72 inches.

Working Pressure
Up to the maximum rating of the flange. See submittal(s) for details.

Application
Used to provide offset, deflection and restraint for systems with misaligned flanges.

Documents
Brochure
Catalog Page
Installation Instructions (3-12 inch sizes)
Installation Instructions (14-72 inch sizes)
Product Submittal (3-12 inch sizes)
Product Submittal (14-72 inch sizes)
Drawing (3-12 inch sizes)
Drawing (14 - 72 inch sizes)
Drawing (4 - 12 inch sizes with CLS 300 Flange)


470
Pipe Restraint

Description
Pipe restraint system for PVC pipe. Manufactured in the U.S.A.

Nominal Sizes
14 - 30 inches.

Working Pressure
Up to the pressure rating of the pipe.

Application
Provides restraint of MJ fittings, bell and spigot joints and bolted sleeve type couplings.

Pipe Compatibility
Recommended for use on PVC pipe.

Documents
Catalog Page
Install Instructions (14-24 inch for Bell Joints & Couplings)
Install Instructions (14-24 inch for Mechanical Joints)
Install Instructions (30 inch for Bell Joints and Couplings)
Product Submittal
Drawing (470SJ for Bell Joints and Couplings)
Drawing (470MJ for Mechanical Joints)


Field Flange
Pipe Restraint

Description
Pipe restraint. Manufactured in the U.S.A.

Nominal Sizes
4 - 12 inches.

Working Pressure
Up to 300 psi.

Application
Used to join plain end pipe to flanged fittings without threading or welding.

Pipe Compatibility
Recommended for use on steel and ductile iron pipe.

Documents
Catalog Page
Installation Instructions
Product Submittal
Drawing


Duc Lug and 90 degree Eye Bolt
Pipe Restrainer

Description
Pipe restraint. Manufactured in the U.S.A.

Nominal Sizes
NA

Working Pressure
NA

Application
Provides restraint of mechanical joints to prevent pull-out for 0.75" rod.

Pipe Compatibility
Recommended for use on steel, cast iron, plastic and other types of pipe.

Documents
Catalog Page
Product Submittal (Duc Lug)
Product Submittal (90 degree Eye Bolt)


A.W.W.A. M-11
Harness Restraint

Description
Harness restraint. Manufactured in the U.S.A.

Nominal Sizes
6 - 96 inches for steel pipe. Other sizes available.

Working Pressure
See submittal.

Application
Provides restraint for mechanical couplings on steel pipelines.

Pipe Compatibility
Recommended for use on steel pipe.

Documents
Catalog Page
Product Submittal


490 Series
Romac Harness Lugs and Tie Rods

Description
Harness lugs. Manufactured in the U.S.A.

Nominal Sizes
3 - 72 inches.

Working Pressure
See catalog pages for details.

Application
Provides restraint for flanged connections. Designed for use with an ANSI B16.1 Cls 125, ANSI B16.5 Cls 150, AWWA C207 Cls B, AWWA C207 Cls D, or AWWA C207 Cls E. Radius of lug designed to provide clearance on high hub threaded ductile iron flanges. Lugs for Cls 250 / 300 are also available.

Documents
Catalog Page
Installation Instructions
Drawing (490 3 - 12 inch)
Drawing (490 14 -72 inch)
Drawing (491 3 - 12 inch)
Drawing (491 14 - 48 inch)
Drawing (492 3 - 24 inch)
Drawing (493 12 -54 inch)
Drawing (494 3 - 30 inch)


PIPE PRODUCTS FOR WATER AND WASTE WATER
REPAIR CLAMPS | COUPLINGS | FLANGED COUPLINGS | EXPANSION JOINTS | SERVICE SADDLES | TAPPING SLEEVES
DISMANTLING JOINTS | SEWER PRODUCTS | RESTRAINT SYSTEMS | HDPE PIPE PRODUCTS | MISCELLANEOUS
TRANSMATE TAPPING EQUIPMENT | VALVE INSERTION

© 2017 ROMAC INDUSTRIES, INC. | 1.800.426.9341