Loading
ALL TAPPING SLEEVES

SST
Stainless Steel Tapping Sleeves

Description
Full circumferential seal, all stainless steel tapping sleeve with side lifter bars. Available with ductile iron flange, stainless steel flange or MJ outlet. Meets MSS SP-124 and AWWA C223. Manufactured in the U.S.A.

Nominal Sizes
4 - 24 inches.

Outlet Sizes
Up to 12 inches.

Working Pressures
4 - 8 inch: 250 psi.
10 - 24 inch: 200 psi.

Application
Used to make a branch outlet.

Pipe Compatibility
Recommended for use on steel, cast iron, asbestos cement, plastic and other types of pipe.

Documents
Catalog Pages
Installation Instructions (SST)
Installation Instructions (SST-MJ)
Product Submittal (stainless steel flange)
Product Submittal (ductile iron flange)
Product Submittal (MJ outlet)
SST Dimensions
SST-MJ Dimensions


SSTIII
Stainless Steel Tapping Sleeves

Description
Full circumferential seal, all stainless steel tapping sleeve with triangular side bars. Available with ductile iron flange, stainless steel flange or MJ outlet. Meets MSS SP-124 and AWWA C223. Manufactured in the U.S.A.

Nominal Sizes
4 - 30 inches.

Outlet Sizes
Up to 12 inches.

Working Pressures
4 - 8 inch: 250 psi.
10 - 24 inch: 200 psi.
26 - 30 inch: 150 psi.

Application
Used to make a branch outlet.

Pipe Compatibility
Recommended for use on steel, cast iron, asbestos cement, plastic and other types of pipe.

Documents
Catalog Pages
Installation Instructions (SSTIII)
Installation Instructions (SSTIII-MJ)
Product Submittal (stainless steel flange)
Product Submittal (ductile iron flange)
Product Submittal (MJ outlet)


STS420
Stainless Steel Tapping Sleeve

Description
Stainless steel tapping sleeve with triangular side bars. Also available with a threaded outlet (STS420T). Meets MSS SP-124 and AWWA C223. Manufactured in the U.S.A.

Nominal Sizes
6 - 42 inches.

Outlet Sizes
3 - 24 inch.

Working Pressure
6 - 12 inch: Up to 250 psi.
14 - 36 inch: Up to 150 psi.
42 inch and larger: Up to 150 psi. See submittal for details. For higher pressure ratings, consult your representative.

Application
Used to make a branch outlet.

Pipe Compatibility
Recommended for use on steel, cast iron, and other types of pipe.

Documents
Catalog Page
Installation Instructions
Product Submittal


SST-X
Stainless Steel Line Stopping Sleeve

Description
Stainless steel line stop sleeve. Manufactured in the U.S.A.

Nominal Sizes
4 - 12 inch.

Outlet Sizes
4 - 12 inch.

Pipe Compatibility
Compatible with most line stopping equipment.

Documents
Brochure
Catalog Page
Installation Instructions
Product Submittal


FTS419
Fabricated Steel Tapping Sleeve

Description
Fabricated steel tapping sleeve with drop-in bolts. Meets the requirements of MSP-SP124 and AWWA C223. Manufactured in the U.S.A.

Nominal Sizes
4 - 24 inches.

Outlet Sizes
3 - 12 inch.

Working Pressure
Up to 175 psi.

Application
Used to make a branch outlet.

Pipe Compatibility
Recommended for use on steel, ductile iron and plastic pipe.

Documents
Catalog Page
Installation Instructions
Product Submittal


FTS420
Fabricated Steel Tapping Sleeve

Description
Fabricated steel tapping sleeve with drop-in bolts. Meets the requirements of MSP-SP124 and AWWA C223. Manufactured in the U.S.A.

Nominal Sizes
6 - 42 inches.

Outlet Sizes
3 - 42 inch.

Working Pressures
6 - 12 inch: Up to 250 psi.
14 - 36 inch: Up to 150 psi.
42 inch and larger: Up to 100 psi. For higher pressures, contact your representative.

Application
Used to make a branch outlet.

Pipe Compatibility
Recommended for use on steel, cast iron and other types of pipe.

Documents
Catalog Page
Installation Instructions
Product Submittal


FTS435
Steel Tapping Sleeve

Description
Fabricated steel tapping sleeve. Manufactured in the U.S.A.

Nominal Sizes
Available for all sizes of concrete cylinder pipe.

Outlet Sizes
Determined by application.

Working Pressure
See submittal.

Application
Used to make a branch outlet.

Pipe Compatibility
For use on concrete steel cylinder pipe.

Documents
Catalog Page
Installation Instructions
Product Submittal


FTS425
Tapping Sleeve

Description
Fabricated steel tapping sleeve with side and end gasket seals. Meets the requirements of MSS SP-124 and AWWA C223. Manufactured in the U.S.A.

Nominal Sizes
12 - 96 inches. Larger sizes available upon request.

Outlet Sizes
4 - 96 inch. Larger sizes (up to size on size) available upon request.

Working Pressure
See submittal.

Application
Used to make a branch outlet from a main supply line with extra protection for lines subjected to excessive beam loads.

Pipe Compatibility
Recommended for use on steel, cast iron, asbestos cement, plastic and other types of pipe.

Documents
Catalog Page
Installation Instructions
Product Submittal


FTS445
Tapping Sleeve

Description
Fabricated steel tapping sleeve for weld-on outlets. Manufactured in the U.S.A.

Nominal Sizes
6 - 96 inches.

Outlet Sizes
4 - 24 inch.

Working Pressure
Up to 175 psi. For higher pressure ratings, consult your representative.

Application
Used to make a branch outlet.

Pipe Compatibility
Recommended for use on steel pipe.

Documents
Catalog Page
Installation Instructions
Product Submittal
Drawing


SST-H
Stainless Steel Tapping Sleeve for HDPE Pipe

Description
Full circumferential seal stainless steel tapping sleeve with side lifter bars. Available with stainless steel or ductile iron flange. Manufactured in the U.S.A.

Nominal Sizes
4 - 12 inches.

Outlet Sizes
3 - 10 inch.

Working Pressure
Up to the pressure rating of the pipe or 150 psi, whichever is less.

Application
Used to make a branch outlet.

Pipe Compatibility
Recommended for use on HDPE pipe.

Documents
Catalog Page
Installation Instructions
Product Submittal


FTS423-H
Fabricated Steel Tapping Sleeve for HDPE Pipe.

Description
Fabricated steel tapping sleeve with drop-in bolts. Manufactured in the U.S.A.

Nominal Sizes
4 - 12 inches.

Outlet Sizes
3 - 10 inch.

Working Pressure
Up to the pressure rating of the pipe or 150 psi whichever is less.

Application
Used to make a branch outlet.

Pipe Compatibility
Recommended for use on HDPE pipe.

Documents
Catalog Page
Installation Instructions
Product Submittal


PIPE PRODUCTS FOR WATER AND WASTE WATER
REPAIR CLAMPS | COUPLINGS | FLANGED COUPLINGS | EXPANSION JOINTS | SERVICE SADDLES | TAPPING SLEEVES
DISMANTLING JOINTS | SEWER PRODUCTS | RESTRAINT SYSTEMS | HDPE PIPE PRODUCTS | MISCELLANEOUS
TRANSMATE TAPPING EQUIPMENT | VALVE INSERTION

© 2017 ROMAC INDUSTRIES, INC. | 1.800.426.9341