Tech-Lube Tapping Compound
Ideal for tapping, drilling, etc. Environmentally safe. Manufactured in the U.S.A.
16 oz.
Test Gauge
Designed to pressure test for leaks prior to tapping and during valve insertions. Pressure test any 3/4 inch NPT outlet. Manufactured in the U.S.A.
0 - 200 psi.
Ratchet Box Wrench
Flexible Expansion Joint. Available with single and double ball joints. Manufactured in the U.S.A.
3 - 24 inches. Larger sizes available upon request.
Up to 350 psi.
Flexible expansion joint which accommodates expansion, contraction, rotation, bending and settlement all at the same.
Double Socket Ratchet Wrench.
Heavy duty double socket wrench can tighten nuts on long bolts or all-thread rod without bottoming out and has a simple lever-operated reverse feature. One side fits 5/8 inch heavy hex nuts (commonly used on clamps, couplings, saddles and 3" MJ fittings). The other side fits 3/4 inch heavy hex nuts (commonly used on 4 - 24 inch mechanical joint fittings). Manufactured in the U.S.A.
2.5 lbs.
Air Drive
Air Drive for use with the TapMate. Unidriectional drive clips directly to the back of the TapMate. Maximum .76 HP delivers 47 RPM. 191 ft-lbs. running torque, 254 ft-lbs. stall torque. Manufactured in the U.S.A.
11 lbs.
RIDGID 690
Electric drive used to power the TapMate Too, M1, TapMate Dry Tap, and 5935. 115 V Universal AC motor. 50 - 60 cycle, 15 amps reversible. Delivers 100 ft-lbs at 15 amps - 32 rpm. Delivers 200 ft-lbs. at stall. Can also be used to thread pipe with addition of thread dies.
22 lbs.
RIDGID 700
Electric drive used to power the the TapMate. One piece aluminum frame. Can be used to thread pipe with additionsl thread dies.
25 lbs.
Hydraulic Drive
Ideally suited for the TapMate Too. Manufactured in the U.S.A.
73 lbs.
3 HP Honda gasoline engine.
Multi-Purpose Hydraulic Drive
Ideal for powering the TapMate, TapMate Too and Valve Exerciser. Hydraulic pump delivers 4 gpm to 2,000 psi. Manufactured in the U.S.A.
80 lbs.
6 HP Kohler gasoline engine.
82000 HPU
Full duty cycle hydraulic power unit. Ideal for powering the TapMate XL-424, TapMate and Valve Exerciser. Electic start with recoil start backup. Able to run most hydrualic tools that require 7 - 9 gpm to 2,000 psi. Manufactured in the U.S.A.
200 lbs.
15 HP Kohler gasoline engine.
Sewer Pipe Tapping Machine
Air driven machine for tapping sewer pipes. Manufactured in the U.S.A.
4, 6 and 8 inches.
For use on PVC, A/C, vitirfied clay, concrete and HDPE pipe.
DeChlorinator
Compact dechlorinator quickly dechlorinates and neutralizes pH of released water. Allows water utilities to meet regulations for residual chlorine concentration in released water. Enables contractors to quickly flush highly concentrated chlorinated water in new construction situations. Helps meet EPA, CWA and SDWA legislation for released water entering receiving streams. Manufactured in the U.S.A.
200 - 900 GPM.
Can use all commonly available disinfection and dechlorination reagents.
Type A cam and groove hydrant adapter (FNST) and Type D cam and groove adapter. Other hydrant adapters are available.
Type A and D cam and groove adapter.
Calculator #1: For Vita-D-Chlor amounts based on a known FLOW RATE of water through the deChlorinator and a known FEED RATE of dechlorination solution (mixture of Vita-D-Chlor and water) into the deChlorinator.
Calculator #2: For Vita-D-Chlor amounts for fixed bodies of water (when the exact FLOW RATE and FEED RATE are still unknown).
Calculator #3: For Vita-D-Chlor amounts based on pipeline dimensions.
M1 Pipe Drilling Machine.
Sturdy lightweight machine for cutting .75 inch - 1 inch holes using a separate corporation stop and saddle for water main, wet and dry. For use on PVC, A/C, steel, HDPE, ductile iron and cast iron pipe. Manufactured in the U.S.A.
.75 - 1 inch.
Ridgid 690 and Manually.
5935 Pipe Drilling Machine.
Sturdy lightweight pipe drilling machine. For use on PVC, A/C, steel, ductile iron and cast iron pipe. Manufactured in the U.S.A.
.75 - 2 inches.
Manual.
5930 Pipe Drilling Machine
Sturdy lightweight pipe drilling machine. For use on PVC, A/C, steel, HDPE, ductile iron and cast iron pipe. Manufactured in the U.S.A.
.75 - 1 inch.
Manual.
B-Too Drilling and Tapping Machine
Drills pipe and inserts any .75" - 1" coproration stop under pressure without disassembly. Can be used to extract threaded and defective corporation stops. For use on PVC, ductile iron and cast iron pipe. Manufactured in the U.S.A.
.75 - 1 inch.
Manually or Ridgid 690.
B-1 Direct Corporation Stop Insertion Machine
Pipe tapping machine which taps the pipe and inserts a corporation stop under pressure without disassembling the machine. Also used to extrace threaded and defective corporation stops. For use on PVC, ductile iron and cast iron pipe. Manufactured in the U.S.A.
.75 - 1 inch.
Manually or Ridgid 690.
The Exerciser
Valve and hydrant exerciser. Lightweight and compact Valve Exerciser is easily handled by one person. Takes up to 15 gpm hydraulic power flow rate. Forward and reverse turn with variable torque and speed controls. Manufactured in the U.S.A.
up to 250 ft-lbs.
Multi-Purpose Hydraulic Drive.
TapMate Dry Drill Tap
Sturdy lightweight machine for cutting .75 - 1 inch holes. Drilling shaft rigidly supported at two points. Conforms to pipe sizes 3 - 48 inch. For use on PVC, ductile iron and cast iron pipe. Manufactured in the U.S.A.
.75 - 1 inch.
NA
Manually or Ridgid 690.
TapMate Too
Lightweight tapping machine. For use on PVC, A/C, Ductile Iron, Cast Iron, Steel, HDPE and other types of pipe. Manufactured in the U.S.A.
.75 - 2 inches.
Manually, Multi-Purpose Hydraulic Drive, TapMate Too Hydraulic Drive or Ridgid 690 Electric Drive.
TapMate
Lightweight tapping machine. For use on PVC, A/C, Ductile Iron, Cast Iron, Steel, HDPE and other types of pipe. Manufactured in the U.S.A.
3 - 12 inches.
82000 HPU Hydraulic Power Unit, Multi-Purpose Hydraulic Power Unit, Ridgid 700 or Air Drive.
TapMate XL-424
Heavy duty tapping machine with integrated hyrdraulic drive. For use on PVC, A/C, Ductile Iron, Cast Iron, Steel, HDPE and other types of pipe. Manufactured in the U.S.A.
4 - 24 inches.
82000 HPU Hydraulic Power Unit
