Loading
TAPMATE DRY DRILL TAP
DESCRIPTION

Sturdy lightweight tapping machine. The drilling shaft is supported at two points. Manufactured in the U.S.A.

Tap Sizes
.75 - 1 inches.

Power Sources
Ridgid 690 and Manually.

Pipe Compatibility
Recommended for use on PVC, ductile iron and cast iron pipe.

DOCUMENTS

Catalog Page
Operating Manual
RELATED PRODUCTS

Ridgid 690
Electric Drive

Description
Electric drive used to power the TapMate Too, M1, TapMate Dry Tap, and 5935. 115 V Universal AC motor. 50 - 60 cycle, 15 amps reversible. Delivers 100 ft-lbs at 15 amps - 32 rpm. Delivers 200 ft-lbs. at stall. Can also be used to thread pipe with addition of thread dies.

Approximate Weight
25 lbs.

Documents
Catalog Page


TapMate Too
Tapping Machine

Description
Lightweight tapping machine. Manufactured in the U.S.A.

Tap Sizes
.75 - 2 inches.

Pipe Compatibility
For use on PVC, A/C, Ductile Iron, Cast Iron, Steel, HDPE and other types of pipe.

Working Pressure
150 psi.

Power Source
Manually, TapMate Too Hydraulilc Drive or Ridgid 690 electric drive.

Documents
Catalog Page
Operating Manual

Video:
TapMate Too Overview

Other
Corporation Stop Adapter Cross-Reference


B-1
Direct Corporation Stop Insertion

Description
Pipe tapping machine which taps the pipe and inserts a corportaion stop under pressure without diassembling the machine. Also used to extract threaded and defective corp. stops. Manufactured in the U.S.A.

Tap Sizes
.75 - 1 inches.

Pipe Compatibility
Recommended for use on PVC, ductile iron and cast iron pipe.

Working Pressure
150 psi.

Power Sources
Ridgid 690 and Manually.

Documents
Catalog Page
Operating Manual

Other
Corporation Stop Adapter Cross-Reference


PIPE PRODUCTS FOR WATER AND WASTE WATER
REPAIR CLAMPS | COUPLINGS | FLANGED COUPLINGS | EXPANSION JOINTS | SERVICE SADDLES | TAPPING SLEEVES
DISMANTLING JOINTS | SEWER PRODUCTS | RESTRAINT SYSTEMS | HDPE PIPE PRODUCTS | MISCELLANEOUS
TRANSMATE TAPPING EQUIPMENT | VALVE INSERTION

© 2017 ROMAC INDUSTRIES, INC. | 1.800.426.9341