Loading
ALL TRANSMATE

TapMate XL-424
Tapping Machine

Description
Heavy duty tapping machine with integrated hyrdraulic drive. Manufactured in the U.S.A.

Tap Sizes
4 - 24 inches.

Pipe Compatibility
For use on PVC, A/C, Ductile Iron, Cast Iron, Steel, HDPE and other types of pipe.

Working Pressure
300 psi.

Power Source
82000 HPU Hydraulic Power Unit.

Documents
Catalog Page
Operating Manual
Travel Chart


TapMate
Tapping Machine

Description
Lightweight tapping machine. Manufactured in the U.S.A.

Tap Sizes
3 - 12 inches.

Pipe Compatibility
For use on PVC, A/C, Ductile Iron, Cast Iron, Steel, HDPE and other types of pipe.

Working Pressure
150 psi.

Power Source
82000 HPU Hydraulic Power Unit, Multi-Purpose Hydraulic Power Unit, Ridgid 700 or Air Drive.

Documents
Catalog Page
Submittal
Operating Manual
Travel Chart


TapMate Too
Tapping Machine

Description
Lightweight tapping machine. Manufactured in the U.S.A.

Tap Sizes
.75 - 2 inches.

Pipe Compatibility
For use on PVC, A/C, Ductile Iron, Cast Iron, Steel, HDPE and other types of pipe.

Working Pressure
150 psi.

Power Source
Manually, TapMate Too Hydraulilc Drive or Ridgid 690 electric drive.

Documents
Catalog Page
Operating Manual

Video:
TapMate Too Overview

Other
Corporation Stop Adapter Cross-Reference


M-1
Pipe Drilling Machine

Description
Sturdy lightweight machine for cutting .75 inch - 1 inch holes using a separate corporation stop and saddle for water main, wet and dry. Manufactured in the U.S.A.

Tap Sizes
.75 - 1 inches

Pipe Compatibility
For use on PVC, A/C, steel, HDPE, ductile iron and cast iron pipe.

Working Pressure
150 psi.

Power Sources
Ridgid 690 and Manually.

Documents
Catalog Page
Operating Manual

Other
Corporation Stop Adapter Cross-Reference


5930
Pipe Drilling Machine

Description
Sturdy lightweight pipe drilling machine. Manufactured in the U.S.A.

Tap Sizes
.75 - 1 inches

Pipe Compatibility
For use on PVC, A/C, steel, HDPE, ductile iron and cast iron pipe.

Working Pressure
150 psi.

Power Sources
Manually.

Documents
Catalog Page
Operating Manual

Other
Corporation Stop Adapter Cross-Reference


5935
Pipe Drilling Machine

Description
Sturdy lightweight pipe drilling machine. Manufactured in the U.S.A.

Tap Sizes
.75 - 2 inches.

Pipe Compatibility
For use on PVC, A/C, steel, HDPE, ductile iron and cast iron pipe.

Working Pressure
150 psi.

Power Sources
Manually.

Documents
Catalog Page
Operating Manual

Other
Corporation Stop Adapter Cross-Reference


TapMate Dry Tap
Tapping Machine

Description
Sturdy lightweight tapping machine. The drilling shaft is supported at two points. Manufactured in the U.S.A.

Tap Sizes
.75 - 1 inches.

Pipe Compatibility
Recommended for use on PVC, ductile iron and cast iron pipe.

Power Sources
Ridgid 690 and Manually.

Documents
Catalog Page
Operating Manual


B-1
Direct Corporation Stop Insertion

Description
Pipe tapping machine which taps the pipe and inserts a corportaion stop under pressure without diassembling the machine. Also used to extract threaded and defective corp. stops. Manufactured in the U.S.A.

Tap Sizes
.75 - 1 inches.

Pipe Compatibility
Recommended for use on PVC, ductile iron and cast iron pipe.

Working Pressure
150 psi.

Power Sources
Ridgid 690 and Manually.

Documents
Catalog Page
Operating Manual

Other
Corporation Stop Adapter Cross-Reference


B-Too
Direct Corporation Stop Insertion

Description
Drills pipe and inserts a corporation stop under pressure without disassembly. Can be used to extract trheaded and defective corporation stops. Manufactured in the U.S.A.

Tap Sizes
.75 - 1 inches.

Pipe Compatibility
Recommended for use on PVC, ductile iron and cast iron pipe.

Working Pressure
150 psi.

Power Sources
Ridgid 690 and Manually.

Documents
Catalog Page
Operating Manual

Other
Corporation Stop Adapter Cross-Reference


DeChlorinator

Description
Compact dechlorinator quickly dechlorinates and neutralizes pH of released water. Allows water utilities to meet regulations for residual chlorine concentration in released water. Enables contractors to quickly flush highly concentrated chlorinated water in new construction situations. Helps meet EPA, CWA and SDWA legislation for released water entering receiving streams. Manufactured in the U.S.A.

Flow Rate
200 - 900 GPM.

Reagents
Can use all commonly available disinfection and dechlorination reagents.

Inlet Connection
Type A cam and groove hydrant adapter (FNST) and Type D cam and groove adapter. Other hydrant adapters are available.

Outlet Connection
Type A and D cam and groove adapter.

Documents
Catalog Page
Operating Manual

Vita-D-Chlor Calculators
Calculator #1:
For Vita-D-Chlor amounts based on a known FLOW RATE of water through the deChlorinator and a known FEED RATE of dechlorination solution (mixture of Vita-D-Chlor and water) into the deChlorinator.

Calculator #2:
For Vita-D-Chlor amounts for fixed bodies of water (when the exact FLOW RATE and FEED RATE are still unknown).

Calculator #3:
For Vita-D-Chlor amounts based on pipeline dimensions.


Sewer Pipe Tapping Machine

Description
Tapping machine designed specially for sewer pipe.

Tap Sizes
4, 6 and 8 inch.

Pipe Compatibility
Recommended for use on PVC, vitrified clay, concrete and HDPE pipe.

Documents
Catalog Page
Operating Manual


Valve Exerciser

Description
Valve and hydrant exerciser. Lightweight and compact Valve Exerciser is easily handled by one person. Takes up to 15 gpm hydraulic power flow rate. Forward and reverse turn with variable torque and speed controls. Manufactured in the U.S.A.

Torque
Up to 250 ft-lbs.

Maximum Speed
57 rpm.

Power Source
Multi-Purpose Hydraulic Drive

Documents
Catalog Page
Operating Manual

POWER UNITS

82000 HPU
Hydraulic Power Unit

Description
Full duty cycle hydraulic power unit. Ideal for powering the TapMate XL-424, TapMate and Valve Exerciser. Electic start with recoil start backup. Able to run most hydrualic tools that require 7 - 9 gpm to 2,000 psi. Manufactured in the U.S.A.

Approximate Weight
200 lbs.

Engine
Kohler 14 HP gasoline engine.

Documents
Catalog Page
Operating Manual


Multi-Purpose Hydraulic Drive
Hydraulic Power Unit

Description
Ideal for powering the TapMate, TapMate Too and Valve Exerciser. Hydraulic pump delivers 4 gpm to 2,000 psi. Manufactured in the U.S.A.

Approximate Weight
80 lbs.

Engine
Kohler 7 HP gasoline engine.

Documents
Catalog Page
Operating Manual


Hydraulic Power Unit

Description
Ideally suited to power the TapMate Too. Manufactured in the U.S.A.

Approximate Weight
75 lbs.

Engine
Honda 3 HP gasoline engine.

Documents
Catalog Page
Hydraulic Power Drive Operating Manual
Hydraulic Motor and Drive Head Operating Manual


Ridgid 690
Electric Drive

Description
Electric drive used to power the TapMate Too, M1, TapMate Dry Tap, and 5935. 115 V Universal AC motor. 50 - 60 cycle, 15 amps reversible. Delivers 100 ft-lbs at 15 amps - 32 rpm. Delivers 200 ft-lbs. at stall. Can also be used to thread pipe with addition of thread dies.

Approximate Weight
25 lbs.

Documents
Catalog Page


Ridgid 700
Electric Drive

Description
Electric drive used to power the the TapMate. One piece aluminum frame. Can be used to thread pipe with additional thread dies.

Approximate Weight
25 lbs.

Documents
Catalog Page


Air
Drive

Description
Air Drive designed for use with the TapMate. Unidriectional drive clips directly to the back of the TapMate. Maximum .76 HP delivers 52 RPM. 191 ft-lbs. running torque, 254 ft-lbs. stall torque. Manufactured in the U.S.A.

Approximate Weight
11 lbs.

Documents
Catalog Page
Operating Manual

TOOLS AND ACCESSORIES

Double Socket Ratchet Wrench

Description
Heavy duty double socket wrench can tighten nuts on long bolts or all-thread rod without bottoming out and has a simple lever-operated reverse feature. One side fits 5/8 inch heavy hex nuts (commonly used on clamps, couplings, saddles and 3" MJ fittings). The other side fits 3/4 inch heavy hex nuts (commonly used on 4 - 24 inch mechanical joint fittings). Manufactured in the U.S.A.

Approximate Weight
2.5 lbs.

Documents
Catalog Page


Ratchet Box Wrench

Description
Heavy duty ratchet box wrench. Manufactured in the U.S.A.

Documents
Catalog Page


Pressure Test Gauge

Description
Designed to pressure test for leaks prior to tapping and during valve insertions. Pressure test any 3/4 inch NPT outlet. Manufactured in the U.S.A.

Test Range
0 - 200 psi.

Documents
Catalog Page


Pipe Flaring Tools

Description
Machined to exacting specifications by Romac. No lip to curl the copper tube back, thus assuring the proper fit. Manufactured in the U.S.A.Machined to exacting specifications by Romac. No lip to curl the copper tube back, thus assuring the proper fit. Manufactured in the U.S.A.

Sizes
.5 - 2 inches.

Documents
Catalog Page


Tapping Compound

Description
Ideal for tapping, drilling etc. Environmentally safe. Manufactured in the U.S.A.

Container Size
16 oz.

Documents
Catalog Page


PIPE PRODUCTS FOR WATER AND WASTE WATER
REPAIR CLAMPS | COUPLINGS | FLANGED COUPLINGS | EXPANSION JOINTS | SERVICE SADDLES | TAPPING SLEEVES
DISMANTLING JOINTS | SEWER PRODUCTS | RESTRAINT SYSTEMS | HDPE PIPE PRODUCTS | MISCELLANEOUS
TRANSMATE TAPPING EQUIPMENT | VALVE INSERTION

© 2017 ROMAC INDUSTRIES, INC. | 1.800.426.9341