Loading
TRANSMATE POWER UNITS

82000 HPU
Hydraulic Power Unit

Description
Full duty cycle hydraulic power unit. Ideal for powering the TapMate XL-424, TapMate and Valve Exerciser. Electic start with recoil start backup. Able to run most hydrualic tools that require 7 - 9 gpm to 2,000 psi. Manufactured in the U.S.A.

Approximate Weight
200 lbs.

Engine
Kohler 14 HP gasoline engine.

Documents
Catalog Page
Operating Manual


Multi-Purpose Hydraulic Drive
Hydraulic Power Unit

Description
Ideal for powering the TapMate, TapMate Too and Valve Exerciser. Hydraulic pump delivers 4 gpm to 2,000 psi. Manufactured in the U.S.A.

Approximate Weight
80 lbs.

Engine
Kohler 7 HP gasoline engine.

Documents
Catalog Page
Operating Manual


Hydraulic Power Unit

Description
Ideally suited to power the TapMate Too. Manufactured in the U.S.A.

Approximate Weight
75 lbs.

Engine
Honda 3 HP gasoline engine.

Documents
Catalog Page
Hydraulic Power Drive Operating Manual
Hydraulic Motor and Drive Head Operating Manual


Ridgid 690
Electric Drive

Description
Electric drive used to power the TapMate Too, M1, TapMate Dry Tap, and 5935. 115 V Universal AC motor. 50 - 60 cycle, 15 amps reversible. Delivers 100 ft-lbs at 15 amps - 32 rpm. Delivers 200 ft-lbs. at stall. Can also be used to thread pipe with addition of thread dies.

Approximate Weight
25 lbs.

Documents
Catalog Page


Ridgid 700
Electric Drive

Description
Electric drive used to power the the TapMate. One piece aluminum frame. Can be used to thread pipe with additional thread dies.

Approximate Weight
25 lbs.

Documents
Catalog Page


Air
Drive

Description
Air Drive designed for use with the TapMate. Unidriectional drive clips directly to the back of the TapMate. Maximum .76 HP delivers 52 RPM. 191 ft-lbs. running torque, 254 ft-lbs. stall torque. Manufactured in the U.S.A.

Approximate Weight
11 lbs.

Documents
Catalog Page
Operating Manual


PIPE PRODUCTS FOR WATER AND WASTE WATER
REPAIR CLAMPS | COUPLINGS | FLANGED COUPLINGS | EXPANSION JOINTS | SERVICE SADDLES | TAPPING SLEEVES
DISMANTLING JOINTS | SEWER PRODUCTS | RESTRAINT SYSTEMS | HDPE PIPE PRODUCTS | MISCELLANEOUS
TRANSMATE TAPPING EQUIPMENT | VALVE INSERTION

© 2017 ROMAC INDUSTRIES, INC. | 1.800.426.9341